Sections are easy to build in any size desired

The dock is easily and quickly put up and taken down without working in cold water in the Spring and Fall. The first section is floated into place on top of a boat and pipes are placed in brackets and driven into bottom, first at shore end and then at outer end section. Height of dock may be adjusted from the boat or on top of dock with Leveling Jacks. Set screws securely lock brackets to pipe at desired height.

Succeeding sections are also floated into position with the boat and bolted to extending flanges of Dock Brackets on preceding section. By walking out on new section as it rests on boat, pipes at outer end can be inserted through brackets and driven into bottom. When pipes are in place, dock is leveled and set screws tightened as on preceding section. Process is repeated for each section and dock is soon complete. To take down dock, simply reverse procedure.


Sections can be leveled and adjusted for changing water levels from top of dock with Leveling Jacks. Set screws on brackets are tightened to hold dock in desired position before releasing jack.